Protocol Kit 1638

PROTOCOL for the Semi-Permanent Varnish KIT ref 1638

  1. Hand washing:
    Wash your hands thoroughly with soap to remove any oil or dirt residue, then disinfect them.
  1. Nail preparation:
  • Remove any existing varnish using nail polish remover.
  • Cut and file your nails to the desired shape.
  • Gently push back the cuticles using a previously disinfected boxwood stick or metal cuticle pusher.
Tips: Small dead skin on the surface of the nail must be removed, the gel cannot adhere properly to an oily surface like the skin.
  1. Image:
  • Gently file the surface of your nails using a file without pressing too hard to mattify the nail and create a more adherent surface without damaging the nail.
  1. Dusting:
  • Use a dusting brush and a cotton pad soaked in cleaner to remove nail dust and degrease the nail.
  1. Application of Nail prep and Primer without acid:
  • Apply a thin layer of Nail prep without touching the skin and let it air dry.
  • Apply a thin layer of Acid Free Primer without touching the cuticles and allow to air dry.
  1. Application of Lollibond semi-permanent varnish base:
  • Apply a thin coat of Lollibond Base to each nail, avoiding the cuticles.
  • Catalyze for 30 seconds under the UV/LED lamp.
Tips: There is a sticky layer of semi-permanent varnish left, do not remove it, it will allow the other layers of semi-permanent varnish to adhere well
  1. Application of semi-permanent varnish:
  • Apply a thin coat of Lollilac semi-permanent varnish in the color of your choice to each nail.
  • Avoid touching skin or cuticles.
  • Catalyze 30 seconds under UV/LED lamp, 60 seconds for dark colors.
  1. Second coat of varnish:
  • Apply a second coat of semi-permanent varnish for a more intense color and better coverage.
  • Catalyze 30 seconds under UV/LED lamp, 60 seconds for dark colors.
  1. Application of the Mirror Finish Top Coat:
  • Apply a coat of Top Coat Finish to give a brilliant shine and protect your color.
  • Catalyze for 60 seconds under the UV/LED lamp.
  1. Final cleaning:
  • Our Mirror Top Coat has no sticky layer, there is no need to degrease it. But if you use another finish for example our Satin Top Coat, remove the sticky layer using a cotton pad soaked in cleaner to reveal a perfect manicure.
  1. Hydration:
  • Finish by applying a cuticle oil to nourish your nails and cuticles.

Additional tips:
  • Do not open your varnishes, base and top coat in sunlight or in front of a switched on UV/LED lamp, this may cause them to harden in their bottle.
  • Avoid using harsh chemicals on your nails to prolong the wear of your polish.